Connecting via WEB AP
Once connected to WiFI, point a web browser at http://192.168.99.1 and go to the system status link. From here you will have access to all of the features available through WEB AP. You can confirm your Firmware, check your sensor status, perform simple and advanced calibrations, check GPS information, system messages, factory resets, etc.
Skyviper web site
You can also access the WEB AP interface by going to http://fly.sky-viper.com/ This is an offline-accessible website. If you visit it while online then it will be cached permanently in your browser for offline use, including any GPS files you may need to help secure a fast GPS Lock.
MAVLink Access
When on WiFi the drone broadcasts MAVLink from the flight board on UDP port 14550. Start up your favorite GCS (Mission Planner, QGroundControl, etc.) and ask it to connect to port 14550 on UDP.
After connecting on WiFI you may wish to change the WiFi password or SSID on http://192.168.99.1/system.html
Note that to use the SkyViper app, the SSID must start with SKYVIPERGPS_