If the WiFi password was changed from the default password in the System Control tab of the WEB AP and cannot be remembered, a password reset can be done. To reset to the default SSID and Password, turn on the TX, connect a battery to the Sky Viper, immediately turn the Sky Viper over to rest on its back and hold down both the PHOTO and VIDEO button simultaneously for a few seconds. Disconnect the battery from the Sky Viper and return it to an upright position. Connect the battery to the Sky Viper and power cycle the TX. You should now see the default SSDI on the list of WiFi networks and will be able to access it by entering the default password, which is “vipergps” (without the quotes).